ZLJ50G Clamp loader



Model
Introduction
ZLJ50G Clamp loader

·The engine equipped with is integated and of high performance with electric starting,stopping,cutting-off.Operating is easy and reliable
·Pilot control units make a light,flexible and stable operation.
·Working unit with optimized design,articulation points layout is rational.single arm short pulling lever,Lever machanism with special Z type reverse revolution makes less impact.Automatic leveling,operation is light.The main part of bucket is made of special wear-resisting steel plate.
·Duble pads and dual circuits brake,two-in-one of emergency stop and parking stop with low air pressure protection facilites safe traveling.
·Integral openable hood made of compound material makes easy maintainance.
·Ecolocally designed luxury cab,eco-friendly glass from Korea,air-conditioner and heater installment facilitates wide visibility,shock-absorbing,safe and confortable operation.
·Fully hydraulic powered steering with flow-amplified, duble pumps with one flow prolongs the pump's life and reduces the engine load and speeds up movement cycle.

ZLJ50G Clamp loader main specification
Description specification unit
Min.clamp diameter Φ450/Φ800 mm
Rate load 5000 kg
Dump clearance(downward/side) 3230 mm
Dump reach(downward) 1845 mm
Raising time < 6.5 s
Total cycling time < 11.5 s
Max.traction force 150 kN
Max.breakout force/TD> 170 kN
Articulatin angle 35 °
Min.Turning radius 6400 mm
Greadability 28 °
Wheel base 3300 mm
Track 2200 mm
Speed    
1st(F/R) 11.5/16.5 km/h
2nd(F/R) 37 km/h
Engine model WD 615.67G3-31A
Rated power/rated speed 162kw/2200r/min
(LXWXH) 8376×3000×3485 mm
Operating weight 18 t
Tyres 23.5-25  
 

 

Copyright © 2008 xcmcme . All Rights Reserved.